5pc 1/2" Drip Irrigation Tee Connector 16mm PE Pipe to 4/7mm Hose

Key Features

• Plastic Build — It is made of plastic, so it is light to handle in a garden line.
• 16mm Pipe Fit — It is made for joining 16mm (0.63 in) PE hose to 4/7mm (0.16/0.28 in) hose.
• Micro Hose Size — It takes 4/7 mm (0.16–0.28 in) micro hose.
• Pressure Limit — It is rated for pressures below 850 kPa.

Product Specifications

• Piece Count: 5 pc
• Material: Plastic
• Plastic Type: PP
• Diameter: 1/2 inch
• Dimensions: 16 mm (0.63 in) , 4/7 mm (0.16/0.28 in)
• Pressure: Below 850 kPa
• Standard: ANSI

What It Is / How It Works

This drip irrigation tee connector is a plastic fitting for joining 16mm (0.63 in) PE pipe to 4/7mm (0.16/0.28 in) micro hose in a garden watering setup. The pack contains 5 pieces.

Who It's For / Use Cases

Connectors of this type suit gardeners and hobbyists who run drip irrigation or micro-hose watering lines and need to split one supply line into several smaller hoses. They also suit people who expand an existing garden watering layout and want fittings that match a common pipe-to-hose transition.

How to Use / Care

1. Use it to connect 16mm (0.63 in) PE pipe to 4/7mm (0.16/0.28 in) micro hose in a drip irrigation or garden watering system.

How to Choose

Start with the pipe and hose sizes in your layout. This set is for a 16mm (0.63 in) PE pipe side and a 4/7mm (0.16/0.28 in) micro hose side, so match those two diameters before buying. Choose the 5-piece pack when you need several branch points in one system.

Frequently Asked Questions

What sizes does this connector fit?
It joins 16mm (0.63 in) PE pipe to 4/7mm (0.16/0.28 in) micro hose. The listed dimensions are 16 mm (0.63 in) and 4/7 mm (0.16–0.28 in).

How many pieces are in the pack?
The pack has 5 pieces.

What is it made of?
It is made of plastic, and the listed plastic type is PP.

What pressure can it handle?
It is rated for pressures below 850 kPa.

What standard does it follow?
The listed standard is ANSI.